WHERE AND HOW OFTEN USED CABLE PUMP SHOULD BE?
 
Cable pump enable safe electrical connections. Standard tubular cable pump, despite being same the size of the pipe varies according to the size.
 
Cautions When Fitting Pump
 
- Cable too long or too short must not be opened.
- All the stripped part of the cable pump / ferrule should be in.
- To be used should be appropriate to the cable pump part.
- Pump in the right gauge must be tightened with pliers.
- Tightening the screws method in the klemens, pump should not be applied to, necessarily mounting must be made in advance by squeezing with pliers suitable.
- More than 1-2 mm from pump plugged into the cable if need be, instantly oppressed pull the cable itself when tightening with pliers and will be attached to the full extent.
- If uninsulated pump been used after mounting, necessarily the exposed part of the pump must be isolated.
 
Where to Use
 
With the corkscrew rule tighten location used like pump, under bolt, under nut. Use the connector structure based on the characteristics that are suitable for used pump.